« Configure the Elasticsearch output Configure the Kafka output »
Elastic Docs ›Packetbeat Reference [8.16] ›Configure Packetbeat ›Configure the output

Configure the Logstash output

edit

Configure the Logstash output

edit

The Logstash output sends events directly to Logstash by using the lumberjack protocol, which runs over TCP. Logstash allows for additional processing and routing of generated events.

Prerequisite

To send events to Logstash, you also need to create a Logstash configuration pipeline that listens for incoming Beats connections and indexes the received events into Elasticsearch. For more information, see Getting Started with Logstash. Also see the documentation for the Beats input and Elasticsearch output plugins.

If you want to use Logstash to perform additional processing on the data collected by Packetbeat, you need to configure Packetbeat to use Logstash.

To do this, edit the Packetbeat configuration file to disable the Elasticsearch output by commenting it out and enable the Logstash output by uncommenting the Logstash section:

output.logstash:
  hosts: ["127.0.0.1:5044"]

The hosts option specifies the Logstash server and the port (5044) where Logstash is configured to listen for incoming Beats connections.

For this configuration, you must load the index template into Elasticsearch manually because the options for auto loading the template are only available for the Elasticsearch output.

Accessing metadata fields

edit

Every event sent to Logstash contains the following metadata fields that you can use in Logstash for indexing and filtering:

{
    ...
    "@metadata": { 
      "beat": "packetbeat", 
      "version": "8.16.0" 
    }
}

Packetbeat uses the @metadata field to send metadata to Logstash. See the Logstash documentation for more about the @metadata field.

The default is packetbeat. To change this value, set the index option in the Packetbeat config file.

The current version of Packetbeat.

You can access this metadata from within the Logstash config file to set values dynamically based on the contents of the metadata.

For example, the following Logstash configuration file tells Logstash to use the index reported by Packetbeat for indexing events into Elasticsearch:

input {
  beats {
    port => 5044
  }
}

output {
  elasticsearch {
    hosts => ["http://localhost:9200"]
    index => "%{[@metadata][beat]}-%{[@metadata][version]}" 
    action => "create"
  }
}

%{[@metadata][beat]} sets the first part of the index name to the value of the beat metadata field and %{[@metadata][version]} sets the second part to the Beat’s version. For example: packetbeat-8.16.0.

Events indexed into Elasticsearch with the Logstash configuration shown here will be similar to events directly indexed by Packetbeat into Elasticsearch.

If ILM is not being used, set index to %{[@metadata][beat]}-%{[@metadata][version]}-%{+YYYY.MM.dd} instead so Logstash creates an index per day, based on the @timestamp value of the events coming from Beats.

Compatibility

edit

This output works with all compatible versions of Logstash. See the Elastic Support Matrix.

Configuration options

edit

You can specify the following options in the logstash section of the packetbeat.yml config file:

enabled

edit

The enabled config is a boolean setting to enable or disable the output. If set to false, the output is disabled.

The default value is true.

hosts

edit

The list of known Logstash servers to connect to. If load balancing is disabled, but multiple hosts are configured, one host is selected randomly (there is no precedence). If one host becomes unreachable, another one is selected randomly.

All entries in this list can contain a port number. The default port number 5044 will be used if no number is given.

compression_level

edit

The gzip compression level. Setting this value to 0 disables compression. The compression level must be in the range of 1 (best speed) to 9 (best compression).

Increasing the compression level will reduce the network usage but will increase the CPU usage.

The default value is 3.

escape_html

edit

Configure escaping of HTML in strings. Set to true to enable escaping.

The default value is false.

worker or workers

edit

The number of workers per configured host publishing events to Logstash. This is best used with load balancing mode enabled. Example: If you have 2 hosts and 3 workers, in total 6 workers are started (3 for each host).

loadbalance

edit

When loadbalance: true is set, Packetbeat connects to all configured hosts and sends data through all connections in parallel. If a connection fails, data is sent to the remaining hosts until it can be reestablished. Data will still be sent as long as Packetbeat can connect to at least one of its configured hosts.

When loadbalance: false is set, Packetbeat sends data to a single host at a time. The target host is chosen at random from the list of configured hosts, and all data is sent to that target until the connection fails, when a new target is selected. Data will still be sent as long as Packetbeat can connect to at least one of its configured hosts. To rotate through the list of configured hosts over time, use this option in conjunction with the ttl setting to close the connection at the configured interval and choose a new target host.

The default value is false.

output.logstash:
  hosts: ["localhost:5044", "localhost:5045"]
  loadbalance: true
  index: packetbeat

ttl

edit

Time to live for a connection to Logstash after which the connection will be re-established. Useful when Logstash hosts represent load balancers. Since the connections to Logstash hosts are sticky, operating behind load balancers can lead to uneven load distribution between the instances. Specifying a TTL on the connection allows to achieve equal connection distribution between the instances. Specifying a TTL of 0 will disable this feature.

The default value is 0. This setting accepts duration data type values.

The "ttl" option is not yet supported on an async Logstash client (one with the "pipelining" option set).

pipelining

edit

Configures the number of batches to be sent asynchronously to Logstash while waiting for ACK from Logstash. Output only becomes blocking once number of pipelining batches have been written. Pipelining is disabled if a value of 0 is configured. The default value is 2.

proxy_url

edit

The URL of the SOCKS5 proxy to use when connecting to the Logstash servers. The value must be a URL with a scheme of socks5://. The protocol used to communicate to Logstash is not based on HTTP so a web-proxy cannot be used.

If the SOCKS5 proxy server requires client authentication, then a username and password can be embedded in the URL as shown in the example.

When using a proxy, hostnames are resolved on the proxy server instead of on the client. You can change this behavior by setting the proxy_use_local_resolver option.

output.logstash:
  hosts: ["remote-host:5044"]
  proxy_url: socks5://user:password@socks5-proxy:2233

proxy_use_local_resolver

edit

The proxy_use_local_resolver option determines if Logstash hostnames are resolved locally when using a proxy. The default value is false, which means that when a proxy is used the name resolution occurs on the proxy server.

index

edit

The index root name to write events to. The default is the Beat name. For example "packetbeat" generates "[packetbeat-]8.16.0-YYYY.MM.DD" indices (for example, "packetbeat-8.16.0-2017.04.26").

This parameter’s value will be assigned to the metadata.beat field. It can then be accessed in Logstash’s output section as %{[@metadata][beat]}.

ssl

edit

Configuration options for SSL parameters like the root CA for Logstash connections. See SSL for more information. To use SSL, you must also configure the Beats input plugin for Logstash to use SSL/TLS.

timeout

edit

The number of seconds to wait for responses from the Logstash server before timing out. The default is 30 (seconds).

max_retries

edit

The number of times to retry publishing an event after a publishing failure. After the specified number of retries, the events are typically dropped.

Set max_retries to a value less than 0 to retry until all events are published.

The default is 3.

bulk_max_size

edit

The maximum number of events to bulk in a single Logstash request. The default is 2048.

Events can be collected into batches. Packetbeat will split batches read from the queue which are larger than bulk_max_size into multiple batches.

Specifying a larger batch size can improve performance by lowering the overhead of sending events. However big batch sizes can also increase processing times, which might result in API errors, killed connections, timed-out publishing requests, and, ultimately, lower throughput.

Setting bulk_max_size to values less than or equal to 0 disables the splitting of batches. When splitting is disabled, the queue decides on the number of events to be contained in a batch.

slow_start

edit

If enabled, only a subset of events in a batch of events is transferred per transaction. The number of events to be sent increases up to bulk_max_size if no error is encountered. On error, the number of events per transaction is reduced again.

The default is false.

backoff.init

edit

The number of seconds to wait before trying to reconnect to Logstash after a network error. After waiting backoff.init seconds, Packetbeat tries to reconnect. If the attempt fails, the backoff timer is increased exponentially up to backoff.max. After a successful connection, the backoff timer is reset. The default is 1s.

backoff.max

edit

The maximum number of seconds to wait before attempting to connect to Logstash after a network error. The default is 60s.

« Configure the Elasticsearch output Configure the Kafka output »