Autodiscover

edit

When you run applications on containers, they become moving targets to the monitoring system. Autodiscover allows you to track them and adapt settings as changes happen. By defining configuration templates, the autodiscover subsystem can monitor services as they start running.

You define autodiscover settings in the metricbeat.autodiscover section of the metricbeat.yml config file. To enable autodiscover, you specify a list of providers.

Providers

edit

Autodiscover providers work by watching for events on the system and translating those events into internal autodiscover events with a common format. When you configure the provider, you can optionally use fields from the autodiscover event to set conditions that, when met, launch specific configurations.

On start, Metricbeat will scan existing containers and launch the proper configs for them. Then it will watch for new start/stop events. This ensures you don’t need to worry about state, but only define your desired configs.

Docker
edit

The Docker autodiscover provider watches for Docker containers to start and stop.

These are the available fields during within config templating. The docker.* fields will be available on each emitted event. event:

  • host
  • port
  • docker.container.id
  • docker.container.image
  • docker.container.name
  • docker.container.labels

For example:

{
  "host": "10.4.15.9",
  "port": 6379,
  "docker": {
    "container": {
      "id": "382184ecdb385cfd5d1f1a65f78911054c8511ae009635300ac28b4fc357ce51"
      "name": "redis",
      "image": "redis:3.2.11",
      "labels": {
        "io.kubernetes.pod.namespace": "default"
        ...
      }
    }
  }
}

You can define a set of configuration templates to be applied when the condition matches an event. Templates define a condition to match on autodiscover events, together with the list of configurations to launch when this condition happens.

Conditions match events from the provider. Providers use the same format for Conditions that processors use.

Configuration templates can contain variables from the autodiscover event. They can be accessed under the data namespace. For example, with the example event, "${data.port}" resolves to 6379.

Metricbeat supports templates for modules:

metricbeat.autodiscover:
  providers:
    - type: docker
      labels.dedot: true
      templates:
        - condition:
            contains:
              docker.container.image: redis
          config:
            - module: redis
              metricsets: ["info", "keyspace"]
              hosts: "${data.host}:6379"

This configuration launches a redis module for all containers running an image with redis in the name. labels.dedot defaults to be true for docker autodiscover, which means dots in docker labels are replaced with _ by default.

Kubernetes
edit

The Kubernetes autodiscover provider watches for Kubernetes nodes, pods, services to start, update, and stop.

These are the available fields during within config templating. The kubernetes.* fields will be available on each emitted event.

Generic fields:
edit
  • host
  • port (if exposed)
  • kubernetes.labels
  • kubernetes.annotations
Pod specific:
edit
  • kubernetes.container.id
  • kubernetes.container.image
  • kubernetes.container.name
  • kubernetes.namespace
  • kubernetes.node.name
  • kubernetes.pod.name
  • kubernetes.pod.uid
Node specific:
edit
  • kubernetes.node.name
  • kubernetes.node.uid
Service specific:
edit
  • kubernetes.namespace
  • kubernetes.service.name
  • kubernetes.service.uid
  • kubernetes.annotations

If the include_annotations config is added to the provider config, then the list of annotations present in the config are added to the event.

If the include_labels config is added to the provider config, then the list of labels present in the config will be added to the event.

If the exclude_labels config is added to the provider config, then the list of labels present in the config will be excluded from the event.

if the labels.dedot config is set to be true in the provider config, then . in labels will be replaced with _.

if the annotations.dedot config is set to be true in the provider config, then . in annotations will be replaced with _.

For example:

{
  "host": "172.17.0.21",
  "port": 9090,
  "kubernetes": {
    "container": {
      "id": "bb3a50625c01b16a88aa224779c39262a9ad14264c3034669a50cd9a90af1527",
      "image": "prom/prometheus",
      "name": "prometheus"
    },
    "labels": {
      "project": "prometheus",
      ...
    },
    "namespace": "default",
    "node": {
      "name": "minikube"
    },
    "pod": {
      "name": "prometheus-2657348378-k1pnh"
    }
  },
}

The configuration of templates and conditions is similar to that of the Docker provider. Configuration templates can contain variables from the autodiscover event. They can be accessed under data namespace.

The kubernetes autodiscover provider has the following configuration settings:

node
(Optional) Specify the node to scope metricbeat to in case it cannot be accurately detected, as when running metricbeat in host network mode.
namespace
(Optional) Select the namespace from which to collect the metadata. If it is not set, the processor collects metadata from all namespaces. It is unset by default. The namespace configuration only applies to kubernetes resources that are namespace scoped.
cleanup_timeout
(Optional) Specify the time of inactivity before stopping the running configuration for a container, 60s by default.
kube_config
(Optional) Use given config file as configuration for Kubernetes client. If kube_config is not set, KUBECONFIG environment variable will be checked and if not present it will fall back to InCluster.
resource
(Optional) Select the resource to do discovery on. Currently supported Kubernetes resources are pod, service and node. If not configured resource defaults to pod.
scope
(Optional) Specify at what level autodiscover needs to be done at. scope can either take node or cluster as values. node scope allows discovery of resources in the specified node. cluster scope allows cluster wide discovery. Only pod and node resources can be discovered at node scope.
add_resource_metadata
(Optional) Specify resources against which additional enrichment needs to be done one. add_resource_metadata can be done for node or namespace. Example:
      add_resource_metadata:
        namespace:
          enabled: true
          include_labels: ["namespacelabel1"]
        node:
          enabled: true
          include_labels: ["nodelabel2"]

Metricbeat supports templates for modules:

metricbeat.autodiscover:
  providers:
    - type: kubernetes
      include_annotations: ["prometheus.io.scrape"]
      templates:
        - condition:
            contains:
              kubernetes.annotations.prometheus.io/scrape: "true"
          config:
            - module: prometheus
              metricsets: ["collector"]
              hosts: "${data.host}:${data.port}"

This configuration launches a prometheus module for all containers of pods annotated prometheus.io/scrape=true.

Manually Defining Ports with Kubernetes
edit

Declare exposed ports in your pod spec if possible. Otherwise, you will need to use multiple templates with complex filtering rules. The {port} variable will not be present, and you will need to hardcode ports. Example: {data.host}:1234

When ports are not declared, Autodiscover generates a config using your provided template once per pod, and once per container. These generated configs are de-duplicated after they are generated. If the generated configs for multiple containers are identical, they will be merged into one config.

Pods share an identical host. If only the {data.host} variable is interpolated, then one config will be generated per host. The configs will be identical. After they are de-duplicated, only one will be used.

Jolokia
edit

The Jolokia autodiscover provider uses Jolokia Discovery to find agents running in your host or your network.

Jolokia Discovery mechanism is supported by any Jolokia agent since version 1.2.0, it is enabled by default when Jolokia is included in the application as a JVM agent, but disabled in other cases as the OSGI or WAR (Java EE) agents. In any case, this feature is controlled with two properties:

  • discoveryEnabled, to enable the feature
  • discoveryAgentUrl, if set, this is the URL announced by the agent when being discovered, setting this parameter implicitly enables the feature

There are multiple ways of setting these properties, and they can vary from application to application, please refer to the documentation of your application to find the more suitable way to set them in your case.

Jolokia Discovery is based on UDP multicast requests. Agents join the multicast group 239.192.48.84, port 24884, and discovery is done by sending queries to this group. You have to take into account that UDP traffic between Metricbeat and the Jolokia agents has to be allowed. Also notice that this multicast address is in the 239.0.0.0/8 range, that is reserved for private use within an organization, so it can only be used in private networks.

These are the available fields during within config templating. The jolokia.* fields will be available on each emitted event.

  • jolokia.agent.id
  • jolokia.agent.version
  • jolokia.secured
  • jolokia.server.product
  • jolokia.server.vendor
  • jolokia.server.version
  • jolokia.url

The configuration of this provider consists in a set of network interfaces, as well as a set of templates as in other providers. The network interfaces will be the ones used for discovery probes, they have these settings:

name
the name of the interface (e.g. br0), it can contain a wildcard as suffix to apply the same settings to multiple network interfaces of the same type (e.g. br*).
interval
time between probes (defaults to 10s)
grace_period
time since the last reply to consider an instance stopped (defaults to 30s)
probe_timeout
max time to wait for responses since a probe is sent (defaults to 1s)

Metricbeat supports templates for modules:

metricbeat.autodiscover:
  providers:
    - type: jolokia
      interfaces:
      - name: br*
        interval: 5s
        grace_period: 10s
      - name: en*
      templates:
      - condition:
          contains:
            jolokia.server.product: "tomcat"
        config:
        - module: jolokia
          metricsets: ["jmx"]
          hosts: "${data.jolokia.url}"
          namespace: test
          jmx.mappings:
          - mbean: "java.lang:type=Runtime"
            attributes:
            - attr: Uptime
              field: uptime

This configuration starts a jolokia module that collects the uptime of each tomcat instance discovered. Discovery probes are sent using all interfaces starting with br and en, for the br interfaces the interval and grace_period is reduced to 5 and 10 seconds respectively.

Amazon EC2s
edit

Note: This provider is experimental

The Amazon EC2 autodiscover provider discovers EC2 instances. This is useful for users to launch Metricbeat modules to monitor services running on AWS EC2 instances. For example, to gather MySQL metrics from mysql servers running on EC2 instances with specific tag service: mysql.

This provider will load AWS credentials using the standard AWS environment variables and shared credentials files see Best Practices for Managing AWS Access Keys for more information. If you do not wish to use these, you may explicitly set the access_key_id and secret_access_key variables.

These are the available fields during within config templating. The aws.ec2.* fields and cloud.* fields will be available on each emitted event.

  • cloud.availability_zone
  • cloud.instance.id
  • cloud.machine.type
  • cloud.provider
  • cloud.region
  • aws.ec2.architecture
  • aws.ec2.image.id
  • aws.ec2.kernel.id
  • aws.ec2.monitoring.state
  • aws.ec2.private.dns_name
  • aws.ec2.private.ip
  • aws.ec2.public.dns_name
  • aws.ec2.public.ip
  • aws.ec2.root_device_name
  • aws.ec2.state.code
  • aws.ec2.state.name
  • aws.ec2.subnet.id
  • aws.ec2.tags
  • aws.ec2.vpc.id

Metricbeat supports templates for modules:

metricbeat.autodiscover:
  providers:
    - type: aws_ec2
      period: 1m
      credential_profile_name: elastic-beats
      templates:
        - condition:
            equals:
              aws.ec2.tags.service: "mysql"
          config:
            - module: mysql
              metricsets: ["status", "galera_status"]
              period: 10s
              hosts: ["root:password@tcp(${data.aws.ec2.public.ip}:3306)/"]
              username: root
              password: password

This autodiscover provider takes our standard AWS credentials options. With this configuration, mysql metricbeat module will be launched for all EC2 instances that have service: mysql as a tag.

This autodiscover provider takes our standard AWS credentials options.